1. Open System Setting, then follow the steps: Controllers and Sensors>Pro Controller Wired Communication, and turn it on.
2. Do not use the USB port on the SWITCH dock to charge the VX keyboard.
3. If you cannot play games, but can operate the main menu, you need to follow these steps: System Setting>Controllers>Change Grip/Order, follow the on-screen prompts, and restart games.
4. Insert the mouse into the mouse-specific USB port on the keyboard.
5. From left to right, the keyboard indicators are the connection status indicator, the connection mode indicator, the joystick mode switch indicator, and the power indicator.
Connect to Nintendo Switch
a. Open System Setting, then follow the steps: Controllers and Sensors>Pro Controller Wired Communication,
and turn it on.
b. Plug the USB cable of GM400 mouse into the USB port(only for mouse ) of VX2.
c. Switch on GameSir VX2, the connection status indicator flashes in green , meaning GameSir VX2 is ready
to be connected.
d. Plug the receiver into the USB port of Switch dock, and the receiver indicator flashes in blue, ready to be
connected. When the connection status indicator and the receiver indicator stay on, the connection is completed.
When the connection mode indicator stays red, the identification is completed.
e. Connection completed. GameSir VX2 can work via Switch.
Note: If you cannot play games, but can operate the main menu, you need to follow these steps: System Setting>
Controllers>Change Grip/Order, follow the on-screen prompts, and restart games.
Connect to Nintendo Switch Lite
a. Open Switch Lite System Setting, then follow the steps: Controllers and Sensors>Pro Controller Wired
Communication, and turn it on.
b. Connect Switch Lite to a Type-C to USB adapter that supports Switch system. ( the Type-C to USB adapter
needs to be purchased by yourself)
c. Plug the USB cable of GM400 mouse into the USB port (only for mouse ) of VX2.
d. Switch on GameSir VX2, the connection status indicator flashes in green, meaning GameSir VX2 is ready to be connected.
e. Plug the receiver into the USB port of the Type-C to USB adapter, and the receiver indicator light flashes blue
and they are pairing. When the connection status indicator light and the receiver indicator light stay on, the connection is successful.
When the connection indicator light turns red and is on, the identification is successful.
f. Connection completed. GameSir VX2 can work via Switch Lite.
Note: If you cannot play games, but can operate the main menu, you need to follow these steps: System Setting>
Controllers>Change Grip/Order, follow the on-screen prompts, and restart games.